Introduction - Our Hydration and Repair carriers have often been copied, but like any copy, it is never as good as the original. With over a decade of experience designing these carriers and winning more Ironman Distance World Championships than all our competitors combined, we have launched the first of the next generation of Alloy XLAB Hydration Carriers. This new 'wing' will be on winning race rockets for the next several years. - Rear carriers should not interfere with the air on the rider's back, but instead fill in the turbulence 'hole' behind the riders posterior, thereby reducing the rider's drag (which accounts for 64% of energy used on a racing bicycle). We positioned the carrier in the Wind Tunnel to 'draft' behind the rider causing no extra drag. Storage - We wanted the next generation of carriers to solve the problem of storing keys, cell phones, cash, tire levers, and other essential items. These and other items can be stored in the XLAB MINI BAG which drops vertically and easily into the integrated compartment and is secured by the top X-STRAP. - As you can see, you have two choices for storing your Air Strike CO2 cartridges and NANOFLATOR, or XLAB SPEED CHUCK on the rear of the CARBON WING, using the optional hexagonal X-NUT or in the XLAB MINI BAG. - Tires and tubes are always an issue, so now you can attach them neatly under the CARBON WING inside the XLAB MEZZO BAG. Hydration - With the CARBON WING you can use a single Aqua Shot bottle cage on the rear or one on each side. XLAB recommends using either the GORILLA cage or the GORILLA XT cage for rear carriers. Adjustable Mounting - One of the key features invented by XLAB is the multiple mounting holes for the saddle rail clamps. One position sets the bottle cages close to vertical and others incline the cages for rider preference. Because of it's past success, we have kept the same feature in the XLAB Super Wing for customizing the installation. - In addition, there are 4 sets of holes for the lower cage bolts which with the front holes provides a total of 12 different cage angle positions. Lightweight - We use the latest aerospace aluminum alloy to provide the toughest alloy carrier on the market with no twisting like other hydration carriers. Without hardware the XLAB Super Wing weighs only 85 grams. Bottom Line - The bottom line—simply the most versatile Alloy Hydration and Repair system carrier, complete with mounting hardware. XLAB makes you faster – ask the Pros! Includes: - Carbon Sonic chassis - One Pair X-Straps - All hardware and instructions Material - Carbon Fiber proprietary unidirectional orientation. Weight - Chassis 49 grams, Hardware 30 grams. Total 79 grams Limited Lifetime Warranty - Because of our engineering and testing for this product we give it a Limited Lifetime Warranty to the original owner.

The Delta 425 is among the lightest and stiffest, adjustable single rear bottle carriers on the market. Compatible with ISM saddles. The Delta 425 mounts to the saddle rails and hides in the body's draft. Angle and height are highly customizable for that perfect fit. It includes a tight-gripping Gorilla XT carbon fiber cage for a secure hold.

Enjoy our campout convenient high flow spigot for filling vessels, washing hands or cooking. Hypalon-reinforced hanging points let you hang from a tree or other surface for performance no matter where you are. Compatible with CamelBak filtered by LifeStraw reservoir filter kit for clean drinking water on the go. Even better, the reservoir filter kit has easy collapsibility for simple storage when the party's home for the week.  Repurpose Green Sustainability Badge: Made with safer chemicals.

XLAB's Turbo Wing Rear Carrier delivers options galore so you can easily attach bottles, a bag, CO2 cartridges, and everything else you need for any length ride, and keep it all neatly tucked behind you, out of the wind. There are also 15 different mounting options and you can keep it upright for low drag or invert it for easy access. Plus, it's made of light, strong aluminum, which means there's no twisting under load, no swaying while riding and no bouncing or lost bottles over bumps.

Our new Fusion 6L Group Hydration Reservoir is perfect for adventures with friends and family. Enjoy our campout convenient high flow spigot for filling vessels, washing hands or cooking. It's enhanced by Hypalon-reinforced hanging points let you hang from a tree or other surface for performance no matter where you are. Compatible with CamelBak filtered by LifeStraw reservoir filter kit for clean drinking water on the go. Pair with our ChillBak Pack 30 Cooler for portable party people to keep beverages cool. Dig dynamic design compatibility with our CamelBak reservoir filter kit and easy collapsibility for simple storage when the party's home for the week.  Made with safer chemicals, earning the Repurpose Green Sustainability Badge. 

Being elite means making no compromises when pursuing perfection...everything matters. Mounting your gear in a position to minimize drag is just one tip for performance. The Tri-BackUp Elite is specifically designed for saddles with angled rear rails. - Material: CNC aluminum - Hydration Capacity: One or two bottles (up to 750cc each) - Compatibility: Ninja TC Road, Ninja Pouch+ Road Ninja CO2+ Tri-Cage series - Mount: V rail section of saddle Compatible with CrMo, Ti, & Carbon rails - Max Load: 2.5 kg / 5.5 lb - Added Features: 1 Micro AirBooster and 2 16g CO2 cartridges included - Angle adjustable - Size: 8.6 x 7.6 x 7.4 cm / 3.4” x 3” x 2.9” - Weight: 102 g / 3.60 oz (Total) 88 g / 3.10 oz (w/o Inflator Bracket)

Aluminum BTA hydration mount compatible with Torpedo Versa (sold separately). Pre-drilled front mounting holes for Torpedo Versa or aero computer mounts. - Adjustment Width: 75-150mm - Construction (Plate): 6061-T6 Aluminum - Construction (Brackets): Nylon composite with Velcro straps coated with no-slip extension grip - Weight: 1.9oz (55g)

The BO-6 is a premium bottle opener modeled after our iconic PW-4 pedal wrench, with two offset wrench openings for optimal mechanical advantage and a long vinyl-dipped handle for maximum leverage. Made in the USA from laser-cut 304 stainless steel for a lifetime of use.

This water bottle enclosure is designed to insulate and prevent water from freezing when riding in cold conditions. - Waterproof, 5.5mm neoprene construction with nylon lamination inside and outside - Includes: plastic cage, Allen key, screws and washers - Fits and encloses up to an average 20oz bottle and has enough room for a heat pack - Extended zipper pull for easy open close while riding with winter gloves - Reflective material on logo

A solid aluminum seatpost mount providing an extra location for a water bottle cage on e-bikes or smaller frames. MATERIAL - Diecast aluminum DROPPER POST DIAMETER - Fits ø27.2 - ø31.6 mm (shims incl.) ADDED FEATURE - Compatible with water bottle cage, Topeak BackLoader, tail light and saddle bag SIZE - 13.6 x 6.2 x 4.6 cm / 5.4" x 2.4" x 1.8"

B-RAD Everywhere Base 2

If your thread inserts are already blocked or your bike does not even have any, the TWIST products can be mounted to the bike with the TWIST uni base, the universal bottle holder. It can securely fastened with the aid of two zip ties. On the top tube, the down tube, or the saddle tube – the TWIST uni base can be attached anywhere on the frame. - Compatible with frame tubes with a width of 28-62 mm - Rubber back for frame protection - Compatible with all TWIST Bottles - Attach and detach with ease

Durable, fiber reinforced Composite Matrix construction. Optimized side-load shape for easy bottle access in compact frames (right side configuration only). Integrated storage container below the cage with CO2 cartridge holders on both sides of the cage. Engineered to hold bottles securely. Oval mounting holes allow fine tuning of position on frame. - Weight: 94g

Mount any water bottle cage using our Cage Strap Adapter to any diameter of 3.25" or less. This will allow you to mount a water bottle in all kinds of different areas on your bike—you choose what is best for you! The extra-wide length can be cut to your desired length. The Adapter won't move around because it has a rubber base and compresses on your frame when mounted.

BiKASE's Handlebar/Seat Post Bottle Cage Bracket makes it easy to attach a bottle cage and bottle (both sold separately) to your handlebars or seat post. It's made of durable engineered plastic polymers and includes shims and hardware to fit on handlebars and seat posts with 24 to 32mm diameters or 32mm to 43mm diameters. It also rotates so you can set the bottle where you want it for easy access. • Material: POM head, PP bracket, Stainless steel hardware • Size: 8cm x 6cm x 2cm • Weight: 40 g • Fits handlebar 24mm-32mm • Versatile bracket rotates

Profile Design bottle cage storage securely and conveniently uses your bottle cage as a cargo carrier. The screw-top, bottle-shaped containers carry necessities—whatever you need along the way.

Versatile mount for additional water bottle cage or other accessories. Band style clamp provides easy installation and flexible mounting options. - Fits tubes 20 - 60mm - Engineering grade polymer - Max load: 1.5 kg / 3.31 lb - 26 g / 0.92 oz (2 pcs)

Show your love for bicycles, tools and all things Park Tool with their Coffee Mug. Perfect for impressing your guests with a cool-logo cup, or fueling yourself before a fun wrenching session, a few of these mugs should be in every kitchen cabinet and bicycle workshop, too!

- For water bottle braze-ons - Type: Cage bolt

All metal cup made of 304 Stainless Steel.

Featuring a three-color Park Tool logo and "bike wrench" graphic, Park Tool's Pint Glass is made from heavyweight, dishwasher-safe glass.

Our lovely VO bottle cage mount allows you to affix water bottle cages on your handlebars. They are made of extruded aluminum and are intended for city bikes, so they fit bars up to 25.4mm. The mount comes with the two bolts needed to attach the cage to the mount (Some riders will want to use them on the 26mm "sleeved" road bars. In that case you'll need to file just a touch off the top edge of the "hinge" section so it opens a liitle wider. Of course, it's no problem to use them on "bulged" road bars.)

- Perfect finishing touch to a bike built - 7075-T6 aluminum - M5 x 15mm - 4Nm max torque - For water bottle cages only. - Never use these aluminum bolts in a structural application.

New design ensures unrivaled fitness and cycling performance with proven hydration functionality.

Kick up all the dirt you want, without eating it. This mud cap is compatible with all new Podium bottles launched in 2019, including Podium Chill, Podium Big Chill and Podium Ice. No matter what bottle you prefer, you can now drink clean.

The Fixy cap is the easiest cap to use, period. No push or pull of the mouth-piece required to open and close. Integrated heart-valve provides great flow, and a leak-free seal when not in use. - Self-sealing Heart Valve delivers a high rate of flow with a 100% leak-proof design - No push or pull required to open and close the Heart Valve - BPA-free plastic made from 100% FDA food-grade materials.

Our updated MoFlo cap retains the same mechanism and delivers great flow. It's easier to clean with a flush top and improved grip. The MoFlo valve is easy to open, effortless to use, and 100% leak-proof when closed. - Flush top for easy cleaning. - Engineered poppet design provides 100% leak-free performance. - Valve is soft to the touch and effortless to open and close.

Specialized's MoFlo Cap delivers 50% more water than other traditional caps. MoFlo valve is easy to open, effortless to use, and 100% leak-proof when closed. - New MoFlo cap design features a wide water channel - Double O-ring on valve offers 100% leak-free performance - Valve is soft to the touch and, effortless to open and close

Specialized's WaterGate self-sealing Heart Valve delivers a high rate of flow with a leak-proof design, even when the valve is open, providing a simple drinking experience. - Simple hands-free open and close valve: nothing to turn - 100% leak-proof top locks down for transport or mixing powdered drinks - Rubber over-molded cap for easy grip