Target locked on the top step of the podium and developed in the crucible of World Cup competition, the 40 is the definitive DH race fork. FOX's GRIP X2 is the most tunable, supportive, and smoothest descent-focused damper they've created, ensuring the 40 stays planted in the hot seat - GRIP X2 is the most tunable, supportive, and smoothest descent-focused damper FOX has created - Riders reap the benefits of sitting higher in the travel while tires stay glued to the ground, cornering with increased traction, and experience reduced fatigue - Lower leg bleeders allow atmospheric pressure equalization at the push of a button, and the bypass channels increase volume to alleviate pressure ramping as the fork moves through its travel for better fork performance by increasing small bump sensitivity and responsiveness - The lower leg arch design of the 40 maximizes strength and steering stiffness for downhill performance while adding no unnecessary weight - Fitted with the proven and reliable FLOAT EVOL air spring - Floating thru axle allows perfect chassis alignment and reduces unwanted friction between the upper and lower fork legs, providing much smoother suspension movement throughout the entire range of travel - Kashima Coating on upper tubes for added durability

When you need to go really big, reach for the 38. The 38 redefines the capability of a long travel single crown fork, setting a new benchmark for confidence, performance, and durability. Welcome to the big time. FOX's GRIP X2 is the most tunable, supportive, and smoothest descent-focused damper they've created. Riders reap the benefits of sitting higher in the travel while tires stay glued to the ground, cornering with increased traction. It gives you the confidence to push the limits of downhill and enduro racing, all while reducing overall rider fatigue. GRIP X2 is the winning difference. - GRIP X2 is the most tunable, supportive, and smoothest descent-focused damper FOX has created - Riders reap the benefits of sitting higher in the travel while tires stay glued to the ground, cornering with increased traction, and experience reduced fatigue - Lower leg bleeders allow atmospheric pressure equalization at the push of a button, and the bypass channels increase volume to alleviate pressure ramping as the fork moves through its travel for better fork performance by increasing small bump sensitivity and responsiveness - The lower leg arch design of the 38 shaves every possible gram while maximizing stiffness and strength requirements of enduro and gravity riding - Fitted with the proven and reliable FLOAT EVOL air spring - Kabolt X axle shaves grams while increasing torsional stiffness via a sleeveless, single-sided pinch bolt design - Kashima Coating on upper tubes for added durability

When you need to go really big, reach for the 38. Optimized for 160-180mm of travel, the 38 redefines capability of a long travel single crown fork, setting a new benchmark for confidence, performance, and durability.?Welcome to the big time. GRIP X2 Ultimate descending performance with greater traction and even more control at speed. The most tunable, supportive and smoothest descent-focused damper created by FOX. KABOLT X AXLE A lightweight bolt-on floating axle that shaves grams while increasing torsional stiffness and reducing friction between upper and lower fork legs for smoother suspension travel. LOWER LEG BLEEDERS AND BYPASS CHANNELS Push-button pressure equalization (bleeders) and increased volume to alleviate pressure ramping (bypass channels) allow improved small bump sensitivity and responsiveness. DAMPER GRIP X2 DAMPER CONTROLS HSC - LSC - HSR - LSR AXLE Kabolt-X 110 RAKE 44mm STEERER 1.5 Tapered UPPER TUBE FINISH Kashima AIR CHANNELS Yes BLEEDERS Yes FLOATING AXLE Yes ROTOR SIZE 180 direct Post Mount, Up to 230 compatible MUD GUARD MOUNT Optional FOX 36/38 Mud Guard with sturdy 4-point direct-mount attachment AIR SPRING FLOAT EVOL STARTING WEIGHT 2194g (38, 29, F-S, 180, Grip X, Kabolt X)

The award-winning 36 continues its all-mountain domination with a reinforced chassis to handle the increased loads of eMTB and World Cup EDR-E racing. Available in both trail-focused GRIP X and gravity-focused GRIP X2 damper options. - GRIP X damper exudes exemplary descent performance, refined for less weight, easier setup, and easy access firm mode for pedaling efficiency - Generative design-assisted lower leg arch shape increases torsional stiffness by 20%, while reducing overall material - An additional 30mm bushing overlap than the prior model 36, reduces chassis friction, increasing stiffness, and boosting performance - New compliant FLOAT EVOL air spring design allows for a slight misalignment under load, reducing chassis friction noticeably - Lower leg bypass channels were relocated 90° inboard to a lower stress area, reducing dynamic friction under bending forces - Double-butted stanchion (on damper side) shaves weight, helping us achieve the goal of zero weight increase - New air spring top cap for easier air volume adjustments, removable with cassette tool (Sold separately) - Redesigned bleeders are sleeker and easier to operate - Kabolt X axle shaves grams while increasing torsional stiffness via a sleeveless, single-sided pinch bolt design - Kashima Coating on upper tubes for added smoothness and durability

The award winning 36 continues its all-mountain domination with a reinforced chassis to handle the increased loads of eMTB and World Cup EDR-E racing. Available in both trail-focused GRIP X and gravity-focused GRIP X2 damper options. - GRIP X2 is the most tunable, supportive and smoothest descent-focused damper FOX has created, so riders reap the benefits of sitting higher in the travel while tires stay glued to the ground, cornering with increased traction, and experience reduced fatigue - Generative design-assisted lower leg arch shape increases torsional stiffness by 20%, while reducing overall material - Additional 30mm bushing overlap than the prior model 36, reduces chassis friction, increasing stiffness, and boosting performance - New compliant FLOAT EVOL air spring design allows for a slight misalignment under load, reducing chassis friction noticeably - Lower leg bypass channels were relocated 90° inboard to a lower stress area, reducing dynamic friction under bending forces - Double-butted stanchion (on damper side) shaves weight, helping us achieve goal of zero weight increase - New air spring top cap for easier air volume adjustments, removable with cassette tool (Sold separately) - Redesigned bleeders are sleeker and easier to operate - Kabolt X axle shaves grams while increasing torsional stiffness via a sleeveless, single-sided pinch bolt design - Kashima Coating on upper tubes for added smoothness and durability

Packed with features to dominate the descents, the 36 answers the call from aggressive all-mountain riders. Available in both trail-focused GRIP X and gravity-focused GRIP X2 damper options. - GRIP X damper exudes exemplary descent performance, refined for less weight, easier setup, and an easy access firm mode for pedaling efficiency - Generative design-assisted lower leg arch shape increases torsional stiffness by 20%, while reducing overall material - Additional 30mm bushing overlap than the prior model 36, reduces chassis friction, increasing stiffness, and boosting performance - New compliant FLOAT EVOL air spring design allows for a slight misalignment under load, reducing chassis friction noticeably - Lower leg bypass channels were relocated 90° inboard to a lower stress area, reducing dynamic friction under bending forces - Double-butted stanchion (on damper side) shaves weight, helping us achieve goal of zero weight increase - New air spring top cap for easier air volume adjustments, removable with cassette tool (Sold separately) - Redesigned bleeders are sleeker and easier to operate - Kabolt X axle shaves grams while increasing torsional stiffness via a sleeveless, single-sided pinch bolt design - Kashima Coating on upper tubes for added smoothness and durability

Packed with features to dominate the descents, the 36 answers the call from aggressive all-mountain riders. Available in both trail-focused GRIP X and gravity-focused GRIP X2 damper options. - GRIP X2 is the most tunable, supportive, and smoothest descent-focused damper FOX has created, so riders reap the benefits of sitting higher in the travel while tires stay glued to the ground, cornering with increased traction, and experience reduced fatigue - Generative design-assisted lower leg arch shape increases torsional stiffness by 20%, while reducing overall material - Additional 30mm bushing overlap than the prior model 36, reduces chassis friction, increases stiffness, and boosts performance - New compliant FLOAT EVOL air spring design allows for a slight misalignment under load, reducing chassis friction noticeably - Lower leg bypass channels were relocated 90° inboard to a lower stress area, reducing dynamic friction under bending forces - Double-butted stanchion (on damper side) shaves weight, helping us achieve the goal of zero weight increase - New air spring top cap for easier air volume adjustments, removable with cassette tool (Sold separately) - Redesigned bleeders are sleeker and easier to operate - Kabolt X axle shaves grams while increasing torsional stiffness via a sleeveless, single-sided pinch bolt design - Kashima Coating on upper tubes for added smoothness and durability

The most versatile fork in our lineup, Lyrik harmonizes descending power with effortless efficiency. Lyrik’s legendary performance enters a new era with the Charger 3.1 RC2 damper that offers a wider tunable range of adjustments for the perfect suspension action. Lyrik Ultimate packs an orchestra of industry-leading tech like the ButterCups technology and a DebonAir+ air spring in a stout 35mm chassis. Now better than ever, Lyrik is ready to push your limits. FEATURES - NEW To meet the demands of the world’s best riders, Charger 3.1 is a brilliant evolution of our proven damper platform. With increased damping range and High Speed Compression, Low Speed Compression, and Low Speed Rebound adjustments, Charger 3.1 smooths out the roughest trails. - NEW Charger 3.1 RC2’s adjustment range is broader—with less compression damping in the LSC open position and additional support in the HSC closed position, you get the traction, control, and comfort you need to charge dicey lines all day. - NEW Ever on the quest to eliminate friction, a new bushing package further reduces friction with an updated process at the factory level to give riders a better feel right out of the box. - ButterCups block 20% of high-frequency “trail chatter”. Limiting these vibrations massively reduces hand and arm fatigue leaving you feeling fresh with more control. - DebonAir+ air spring is built to strike the perfect balance of what riders really want: a butterlike small bump feel, increased air volume to add support throughout the travel, and higher overall ride height for more confidence when things get steep. - Maxima Plush Dynamic Suspension Lube reduces friction, lasts longer, and enhances suspension performance ride after ride. - Bolt-in torque cap adapters now included for use with standard hub end caps. - Lightweight machined and anodized crown for premium looks and durability. - Available in the Signature colorway Heavy Meadow Green or Ultimate High Gloss Black. - Ultra-low friction SKF wiper seals provide long lasting fork performance and improve overall suspension feel. - Short fender compatibility. (RockShox fender included)

The most versatile fork in our lineup, Lyrik harmonizes descending power with effortless efficiency. Lyrik’s legendary performance enters a new era with the Charger 3.1 RC2 damper that offers a wider tunable range of adjustments for the perfect suspension action. Lyrik Ultimate packs an orchestra of industry-leading tech like the ButterCups technology and a DebonAir+ air spring in a stout 35mm chassis. Now, better than ever, Lyrik is ready to push your limits. Features: - NEW To meet the demands of the world’s best riders, Charger 3.1 is a brilliant evolution of our proven damper platform. With increased damping range and High high-speed compression, Low low-speed compression, and Low low-speed rebound adjustments, Charger 3.1 smooths out the roughest trails. - NEW Charger 3.1 RC2's adjustment range is broader—with less compression damping in the LSC open position and additional support in the HSC closed position, you get the traction, control, and comfort you need to charge dicey lines all day. - NEW Ever on the quest to eliminate friction, a new bushing package further reduces friction with an updated process at the factory level to give riders a better feel right out of the box. - ButterCups block 20% of high-frequency "trail chatter". Limiting these vibrations massively reduces hand and arm fatigue leaving you feeling fresh with more control. - DebonAir+ air spring is built to strike the perfect balance of what riders really want: a butterlike small bump feel, increased air volume to add support throughout the travel, and higher overall ride height for more confidence when things get steep. - Maxima Plush Dynamic Suspension Lube reduces friction, lasts longer, and enhances suspension performance ride after ride. - Bolt-in torque cap adapters now included for use with standard hub end caps. - Lightweight machined and anodized crown for premium looks and durability. - Available in NEW Electric Red Signature colorway or Ultimate High Gloss Black. - Ultra-low friction SKF wiper seals provide long-lasting fork performance and improve overall suspension feel. - Short fender compatibility. (RockShox fender included)

- 38mm chassis for increased stiffness and rider confidence - ButterCups block 20% of high frequency "trail chatter". Limiting these vibrations massively reduces hand and arm fatigue leaving you feeling fresh with more control. - Charger 3 features a completely new Internal Floating Piston (IFP) design with better fidelity, performance and truly independent adjustments without any "cross talk". - DebonAir+ is built to strike the perfect balance of what riders really want: butter-like small bump feel, increased air volume, and higher overall ride height. - Ultimate Bushing Package maximizes the fork's bushing overlap, reducing friction and creating the smoothest ride possible - Pressure Relief Valves eliminate unwanted air pressure build up in the lower leg caused by variations in altitude or temperature - Includes premium short fender

Packed with features to dominate the descents, the 36 Performance Elite answers the call from aggressive all-mountain riders. Trail and all-mountain riders no longer need to choose between a descent-focused damper or a lightweight endurance damper. The GRIP X damper exudes exemplary descent performance, refined for less weight, easier setup, and easy access to firm mode for pedaling efficiency. - GRIP X damper exudes exemplary descent performance, refined for less weight, easier setup, and easy access to firm mode for pedaling efficiency - Generative design-assisted lower leg arch shape increases torsional stiffness by 20%, while reducing overall material - Additional 30mm bushing overlap than the prior model 36, reduces chassis friction, increases stiffness, and boosts performance - New compliant FLOAT EVOL air spring design allows for a slight misalignment under load, reducing chassis friction noticeably - Lower leg bypass channels were relocated 90° inboard to a lower stress area, reducing dynamic friction under bending forces - Double-butted stanchion (on damper side) shaves weight, helping us achieve goal of zero weight increase - New air spring top cap for easier air volume adjustments, removable with cassette tool (Sold separately) - Redesigned bleeders are sleeker and easier to operate - Kabolt X axle shaves grams while increasing torsional stiffness via a sleeveless, single-sided pinch bolt design - Black anodized upper tubes for added durability

Trail riders have long had to choose between over-forking for stiffness or under-forking for lower weight. The 36 SL Factory suspension fork takes the new 36 chassis and saves weight at strategic locations, creating a no-compromise lightweight fork for today’s hard-hitting—yet shorter travel—Trail riders. Features Kashima Coating on upper tubes for added smoothness and durability. - New generatively designed arch and crown shaping increase torsional stiffness by 20% over 34, while minimizing weight increase - New compliant air spring design reduces chassis friction - New double-butted damper side stanchion sheds grams - Lower Leg Bypass Channels relocated 90° inboard for improved bushing loading and reduced dynamic friction - New easier to operate, low-profile bleeders

Ultra-versatile, super capable, lightweight on the scales, heavy on the attitude—this is Pike. Not afraid of the rooty chutes. Unintimidated by the calf-crushing climbs. We’ve updated our trail-capable legend with the new Charger 3.1 RC2 damper. Along with vibration-killing ButterCups, this damper offers better traction, comfort, and control. With more tunable range, Charger 3.1 enables riders to set up the perfect suspension action for their preferences. A fork designed to level up your trail game. Experience the legend. Features: - NEW To meet the demands of the world’s best riders, Charger 3.1 is a brilliant evolution of our proven damper platform. With increased damping range and High Speed Compression, Low Speed Compression, and Low Speed Rebound adjustments, Charger 3.1 smooths out the roughest trails. - NEW Charger 3.1 RC2’s adjustment range is broader—with less compression damping in the LSC open position and additional support in the HSC closed position, you get the traction, control, and comfort you need to charge dicey lines all day. - NEW Ever on the quest to eliminate friction, a new bushing package further reduces friction with an updated process at the factory level to give riders a better feel right out of the box. - ButterCups block 20% of high-frequency “trail chatter”. Limiting these vibrations massively reduces hand and arm fatigue leaving you feeling fresh with more control. - DebonAir+ air spring is built to strike the perfect balance of what riders really want: a butter-like small bump feel, increased air volume to add support throughout the travel, and higher overall ride height for more confidence when things get steep. - Maxima Plush Dynamic Suspension Lube reduces friction, lasts longer, and enhances suspension performance ride after ride. - Bolt-in torque cap adapters now included for use with standard hub end caps. - Lightweight machined and anodized crown for premium looks and durability. - Available in NEW Electric Red Signature colorway or Ultimate High Gloss Black. - Ultra-low friction SKF wiper seals provide long-lasting fork performance and improve overall suspension feel. - Short fender compatibility. (RockShox fender included)

Ultra-versatile, super capable, lightweight on the scales, heavy on the attitude—this is Pike. Not afraid of the rooty chutes. Unintimidated by the calf-crushing climbs. We’ve updated our trail-capable legend with the new Charger 3.1 RC2 damper. Along with vibration-killing ButterCups, this damper offers better traction, comfort, and control. With more tunable range, Charger 3.1 enables riders to set up the perfect suspension action for their preferences. A fork designed to level up your trail game. Experience the legend. FEATURES - NEW To meet the demands of the world’s best riders, Charger 3.1 is a brilliant evolution of our proven damper platform. With increased damping range and High Speed Compression, Low Speed Compression, and Low Speed Rebound adjustments, Charger 3.1 smooths out the roughest trails. - NEW Charger 3.1 RC2’s adjustment range is broader—with less compression damping in the LSC open position and additional support in the HSC closed position, you get the traction, control, and comfort you need to charge dicey lines all day. - NEW Ever on the quest to eliminate friction, a new bushing package further reduces friction with an updated process at the factory level to give riders a better feel right out of the box. - ButterCups block 20% of high-frequency “trail chatter”. Limiting these vibrations massively reduces hand and arm fatigue leaving you feeling fresh with more control. - DebonAir+ air spring is built to strike the perfect balance of what riders really want: a butter-like small bump feel, increased air volume to add support throughout the travel, and higher overall ride height for more confidence when things get steep. - Maxima Plush Dynamic Suspension Lube reduces friction, lasts longer, and enhances suspension performance ride after ride. - Bolt-in torque cap adapters now included for use with standard hub end caps. - Lightweight machined and anodized crown for premium looks and durability. - Available in the Signature colorway Gloss Silver or Ultimate High Gloss Black. - Ultra-low friction SKF wiper seals provide long lasting fork performance and improve overall suspension feel. - Short fender compatibility. (RockShox fender included)

Own the mountain with the award-winning 36 Factory, featuring high- and low-speed rebound adjuster, improved compression damping and reduced friction for unmatched performance and adjustability. - Genuine Kashima Coating on upper tubes - FIT damper and FLOAT EVOL air spring - Low friction seals for improved performance - Lower Leg Bleeders and Bypass Channels - Floating axles for perfect alignment

- 35mm chassis with a focused all-mountain mindset - satisfyingly stiff, efficient and designed to eliminate as much weight as possible. - ButterCups block 20% of high frequency "trail chatter". Limiting these vibrations massively reduces hand and arm fatigue leaving you feeling fresh with more control. - Charger 3 features a new Internal Floating Piston (IFP) design with better fidelity, performance and truly independent adjustments without any "cross talk". - DebonAir+ is built to balance butter-like small bump feel, increased air volume, and higher overall ride height - Ultimate Bushing Package maximizes the fork's bushing overlap, reducing friction and creating the smoothest ride possible - Pressure Relief Valves eliminate unwanted air pressure build up in the lower leg caused by variations in altitude or temperature. - RockShox premium short fender included

Invert smoothes your ride and gives unbelievable control of your bike on rough roads, loose turns, and steep descents. It’s surprisingly lightweight, easy to use, and strikingly attractive. Riding beyond the pavement can be rough, physically taxing, and unpredictable. Invert goes straight to the source of this problem to offer a smoother ride with more traction, both uphill and down. With Invert, you’ll be more efficient, more relaxed, and have confidence to glide over gravel like you’ve never experienced before. - Inverted design promotes smoothest possible operation, lightest weight, & cleanest visual integration by using a layout opposite to conventional suspension forks - Gravel-Specific tuned, progressive air spring balances traction with the right amount of support and is fully adjustable for rider weight (Max Weight: 350 lb / Max PSI: 250 psi) - Premium carbon fiber crown and steerer is bonded to aluminum upper tubes to provide an incredibly strong and lightweight fork (990 g) - Flat-Mount disc for 160mm rotor (Mounting bolts included) - Integrated 36-degree angle crown race - Included with fork: Ancora Premium Expansion Plug, 52mm ZN40 headset bearing, Brake caliper mounting bolts, and Thru-Axle - Hand-built in Fletcher, NC

Featuring 37mm stanchions and our Reverse Arch design the Mezzer Pro is the stiffest Enduro fork on the market… it’s also the lightest. How did we manage to accomplish this you ask? Well, it’s not hollow if that’s what you're wondering. In fact, this fork is loaded with technologies such as a fully sealed MC² damper, our proven Dorado air spring, and the life-changing IRT volume adjuster. What does all this mean? It means you no longer need to pick two, you can have the lightest, stiffest, and incredibly adjustable fork all at once. Key Features: - 37mm stanchions, Reverse Arch design, and Hexlock SL2 axle combined together result in ultimate stiffness - Originally developed for the Dorado down-hill fork, the Dorado Air Spring offers ultimate sensitivity featuring a self-equalizing negative air spring. When inflating the fork both the positive and negative air chambers are filled simultaneously equalizing the pressures to create an incredibly supple feel - IRT (Infinite Rate Tune) volume adjuster allows control over the mid-stroke support and bottom-out progressivity independent from the initial spring rate to independently tune small bump sensitivity and big-hit performance - Sealed MC² damper provides a range of blow-off thresholds to satisfy any requirement with separate high-speed and low-speed adjustments. Utilizing a bladder, our new sealed cartridge maintains damping consistency in the most severe riding conditions. - 140mm to 180mm internally adjustable travel in 10mm increments (travel spacers included) - 27.5” and 29” wheels - Integrated flexible fender can be installed/removed by three small screws threaded into the arch of the fork Product Details: - MC² bladder cartridge damper offers adjustable high-speed compression damping, low-speed compression damping - Expansion bladder with patent-pending blow-off valve compensates for oil displacement, with lower friction than a traditional internal floating piston - 37mm chassis with torsional stiffness up to 30% higher than similar forks from competitors - Dorado Air spring features an enlarged negative air chamber for linear initial stroke and reduced IRT volume for progressive end stroke - Internally adjustable travel from 180mm to 140mm

XC courses are more technical than ever with the latest longer-travel XC bikes more than capable. With a stout full-width stance, increased travel and tire clearance, and svelte sub-1500g weight, the new 34 SL Factory suspension fork is built to exceed the demands of modern XC and downcountry. Features Kashima Coating on upper tubes for added smoothness and durability - Full-width 34mm chassis with aggressive generative design-aided arch and crown for 17% increase in stiffness and 10mm increase in travel over 34 SC, at only 3% weight increase - 20mm increased bushing overlap for reduced friction and greater stiffness with no increase in axle-to-crown length (compared to 34 SC) - Longer air spring than 34 SC with larger negative volume mirrors 34 LT’s supple initial stroke and 34 SC’s supportive mid and end stroke - Double-butted damper side stanchion for weight savings - Lower Leg Bypass Channels relocated 90° inboard for improved bushing loading and reduced dynamic friction

XC courses are more technical than ever, with the latest longer-travel XC bikes more than capable. With a stout full-width stance, increased travel and tire clearance, and svelte sub-1500g weight, the new 34 SL Factory suspension fork is built to exceed the demands of modern XC and downcountry. Features Kashima Coating on upper tubes for added smoothness and durability - Full-width 34mm chassis with aggressive generative design-aided arch and crown for 17% increase in stiffness and 10mm increase in travel over 34 SC, at only 3% weight increase - 20mm increased bushing overlap for reduced friction and greater stiffness with no increase in axle-to-crown length (compared to 34 SC) - Longer air spring than 34 SC with larger negative volume mirrors 34 LT’s supple initial stroke and 34 SC’s supportive mid and end stroke - Double-butted damper side stanchion for weight savings - Lower Leg Bypass Channels relocated 90° inboard for improved bushing loading and reduced dynamic friction

XC courses are more technical than ever, with the latest longer-travel XC bikes more than capable. With a stout full-width stance, increased travel and tire clearance, and svelte sub-1500g weight, the new 34 SL Factory suspension fork is built to exceed the demands of modern XC and downcountry. Features Kashima Coating on upper tubes for added smoothness and durability - Full-width 34mm chassis with aggressive generative design-aided arch and crown for 17% increase in stiffness and 10mm increase in travel over 34 SC, at only 3% weight increase - 20mm increased bushing overlap for reduced friction and greater stiffness with no increase in axle-to-crown length (compared to 34 SC) - Longer air spring than 34 SC with larger negative volume mirrors 34 LT’s supple initial stroke and 34 SC’s supportive mid and end stroke - Double-butted damper side stanchion for weight savings - Lower Leg Bypass Channels relocated 90° inboard for improved bushing loading and reduced dynamic friction

Cross-country purists… we see you. You’re why SID SL Ultimate is the lightest XC fork on the trail. But weight is meaningless without world-class performance and durability. SID SL features a new Charger Race Day 2 Damper with three-position (3P) compression damping—rigid Lock, plush Open, and efficient Pedal positions, on demand for every inch of the race course. FEATURES - Our lightest 32mm chassis ever. World Cup-proven performance, built for your next podium result. - Longer-travel 110mm option, in case you’re feeling extra. - Charger Race Day 2 damper is the lightest damper on the market. This 3P damper features three compression positions: Open, Pedal, or a rock-solid Lock. - Machined crown for lighter weight and greater strength. - Covetable “Blue Crush” signature colorway and Ultimate High Gloss Black, featuring the new lustrous Pearl White graphics package. - Maxima Plush Dynamic Suspension Lube reduces friction, lasts longer, and enhances suspension performance ride after ride. -DebonAir air spring is tuned specifically to meet the demands of XC and maintains a higher ride height for increased confidence and control.

Climb mountains. Charge descents. SID Ultimate isn’t like other XC forks. It is lighter than ever with a formidable 35mm chassis that holds the line when you’re on the edge. The new Race Day 2 damper features a three-position (3P) compression adjuster—rigid Lock, plush Open, and efficient Pedal positions, all at your fingertips. SID adapts to everything from full-gas cross-country to sporty backcountry loops thanks to a new, higher-volume DebonAir+ spring that’s supple at the top of its travel with tons of tunability. Features NEW 35mm chassis is the perfect blend of light weight and rigidity for the modern XC bike. Plus, we made it lighter…again. NEW Charger Race Day 2 damper is the lightest damper on the market. This 3P damper features three compression positions: Open, Pedal, or a rock-solid Lock. NEW DebonAir+ provides more small-bump sensitivity and tunable mid-stroke support. NEW Bushing package maximizes bushing overlap for a smooth, solid ride. NEW Maxima Plush Dynamic Suspension Lube reduces friction, lasts longer, and enhances suspension performance ride after ride. NEW Crown machined to shave weight without compromising strength and stiffness. NEW Electric Red Signature colorway NEW Bolt-in torque cap adapters included for use with standard hub end-caps

Climb mountains. Charge descents. SID Ultimate isn’t like other XC forks. It is lighter than ever with a formidable 35mm chassis that holds the line when you’re on the edge. The new Race Day 2 damper features a three-position (3P) compression adjuster—rigid Lock, plush Open, and efficient Pedal positions, all at your fingertips. SID adapts to everything from full-gas cross-country to sporty backcountry loops thanks to a new, higher-volume DebonAir+ spring that’s supple at the top of its travel with tons of tunability. Features NEW 35mm chassis is the perfect blend of light weight and rigidity for the modern XC bike. Plus, we made it lighter…again. NEW Charger Race Day 2 damper is the lightest damper on the market. This 3P damper features three compression positions: Open, Pedal, or a rock-solid Lock. NEW DebonAir+ provides more small-bump sensitivity and tunable mid-stroke support. NEW Bushing package maximizes bushing overlap for a smooth, solid ride. NEW Maxima Plush Dynamic Suspension Lube reduces friction, lasts longer, and enhances suspension performance ride after ride. NEW Crown machined to shave weight without compromising strength and stiffness. NEW Electric Red Signature colorway NEW Bolt-in torque cap adapters included for use with standard hub end-caps

Featuring 37mm stanchions and our Reverse Arch design the Mezzer Pro is the stiffest Enduro fork on the market… it’s also the lightest. How did we manage to accomplish this you ask? Well, it’s not hollow if that’s what you're wondering. In fact, this fork is loaded with technologies such as a fully sealed MC² damper, our proven Dorado air spring, and the life-changing IRT volume adjuster. What does all this mean? It means you no longer need to pick two, you can have the lightest, stiffest, and incredibly adjustable fork all at once. Key Features: - 37mm stanchions, Reverse Arch design, and Hexlock SL2 axle combined together result in ultimate stiffness - Originally developed for the Dorado down-hill fork, the Dorado Air Spring offers ultimate sensitivity featuring a self-equalizing negative air spring. When inflating the fork both the positive and negative air chambers are filled simultaneously equalizing the pressures to create an incredibly supple feel - IRT (Infinite Rate Tune) volume adjuster allows control over the mid-stroke support and bottom-out progressivity independent from the initial spring rate to independently tune small bump sensitivity and big-hit performance - Sealed MC² damper provides a range of blow-off thresholds to satisfy any requirement with separate high-speed and low-speed adjustments. Utilizing a bladder, our new sealed cartridge maintains damping consistency in the most severe riding conditions. •140mm to 180mm internally adjustable travel in 10mm increments (travel spacers included) •27.5” and 29” wheels •Integrated flexible fender can be installed/removed by three small screws threaded into the arch of the fork Product Details: - 37mm stanchions Reverse-Arch design and Hexlock SL2 axle for the ultimate stiffness - Fully adjustable IRT air spring to fine-tune ride feel - Sealed MC2 damper provides a range of blow-off thresholds to satisfy any requirement with separate high-speed and low-speed adjustments - 140mm to 180mm internally adjustable travel in 10mm increments (travel spacers included) - Integrated flexible fender can be installed/removed by three small screws threaded into the arch of the fork

At under 1300g, the 32 Step-Cast is a superlight MTB fork and made for marathon racing. This fork features an incredibly light and short travel-specific GRIP SL Damper that not only saves weight, but provides an unparalleled ride feel in its class. With a sleek reverse arch, this fork also gains 40% stiffness over its predecessor - Features an incredibly light and short travel-specific GRIP SL Damper that not only saves weight, but provides an unparalleled ride feel in its class - Riders experience a supple stroke with an optimized pedal-to-bump efficiency, as well as a smooth blowoff force in lockout mode to reduce rider fatigue - The rear arch matrix was generatively designed to increase stiffness by 40% while minimizing the weight penalty - The premium 7000 Series aluminum, zero-offset crown supports angled upper tubes that not only contribute to the 32 Step-Cast's stiffness, but when combined with the ultra-light steerer tube, save approximately 20g over the previous model - Fitted with the proven and reliable FLOAT EVOL air spring - Kabolt SL thru-axle drops an additional 12g over the standard Kabolt axle by eliminating the additional weight of the axle nut and decreasing the flange diameter - Kashima Coating on upper tubes for added durability

XC courses are more technical than ever, with the latest longer-travel XC bikes more than capable. With a stout full-width stance, increased travel and tire clearance, and svelte sub-1500g weight, the new 34 SL Performance Elite suspension fork is built to exceed the demands of modern XC and downcountry. - Full-width 34mm chassis with aggressive generative design-aided arch and crown for 17% increase in stiffness and 10mm increase in travel over 34 SC, at only 3% weight increase - 20mm increased bushing overlap for reduced friction and greater stiffness with no increase in axle-to-crown length (compared to 34 SC) - Longer air spring than 34 SC with larger negative volume mirrors 34 LT’s supple initial stroke and 34 SC’s supportive mid and end stroke - Double-butted damper side stanchion for weight savings - Lower Leg Bypass Channels relocated 90° inboard for improved bushing loading and reduced dynamic friction

At under 1300g, the 32 Step-Cast is a superlight MTB fork and made for marathon racing. This fork features an incredibly light and short travel-specific GRIP SL Damper that not only saves weight, but provides an unparalleled ride feel in its class. With a sleek reverse arch, this fork also gains 40% stiffness over its predecessor - Features an incredibly light and short travel-specific GRIP SL Damper that not only saves weight, but provides an unparalleled ride feel in its class - Riders experience a supple stroke with an optimized pedal-to-bump efficiency, as well as a smooth blowoff force in lockout mode to reduce rider fatigue - The rear arch matrix was generatively designed to increase stiffness by 40% while minimizing the weight penalty - The premium 7000 Series aluminum, zero-offset crown supports angled upper tubes that not only contribute to the 32 Step-Cast's stiffness, but when combined with the ultra-light steerer tube, save approximately 20g over the previous model - Fitted with the proven and reliable FLOAT EVOL air spring - Kabolt SL thru-axle drops an additional 12g over the standard Kabolt axle by eliminating the additional weight of the axle nut and decreasing the flange diameter - Kashima Coating on upper tubes for added durability

Designed not only for the race down but the also ride up. Holding onto every critical line, Lyrik Ultimate features an updated DebonAir air spring paired with our Charger 2.1 damper for unmatched trail control and precision. Ultra-low friction SKF wiper seals and Maxima Plush damping fluid all work overtime to reduce friction, silence noise, and provide unmatched fork performance sunup to sundown. - Updated highly tunable DebonAir air spring offers a buttery smooth feel off the top and maintains a higher ride height for increased confidence in steep terrain - Designed to reduce hand fatigue and fight unwanted friction, the Charger 2.1 damper increases confidence and control over every trail - Charger 2.1 RC2 damper featuring independent high and low-speed compression adjust - Ultra-low friction SKF wiper seals provide long-lasting fork performance and improve overall suspension feel - Maxima Plush damping fluid reduces friction and silences damper noise - Ultimate foil graphics package

The lightest suspension fork FOX has ever built, the 32 Taper-Cast Gravel Fork greatly improves rider experience, increases control, takes the edge off extended gravel rides, and dramatically expands the terrain you can cover. This 32TC fork features an incredibly light and short travel-specific GRIP SL Damper that not only saves weight, but provides an unparalleled ride feel in its class. - GRIP SL is an incredibly light, short travel-specific damper that not only saves weight, but also provides an unparalleled ride feel - Features a sleek drop crown profile and new knob shapes that drastically improve downtube clearance, for fitment on all frame sizes and styles - Sleek, reverse arch design further improves fitment, decreases frontal area for better aerodynamics, and provides stiffness through the arch matrix design - Supple stroke with an optimized pedal-to-bump efficiency, as well as a smooth blowoff force in lockout mode to reduce rider fatigue - Three on-the-fly compression damping positions: Open, Medium, Firm - Optimized for 700c – not 650b compatible