The only thing left to do is answer. No matter where the call beckons, the MTR can get you and your ride there. Designed with versatility at its core, the MTR (aka: modular tray rack) can transport a variety of bikes and can be easily customizable with add-on trays to bring your whole collection of shredders or ride-share with friends. Each MTR rack is built from American-made steel and aluminum for maximum durability. Roomy wheel trays swallow bike tires up to 5 inches wide for a stable hold, while dual-arm wheel holders keep bikes locked in position – and keep the paint chip-free. It’s all built on a rugged hitch-based foundation that can be tilted away, when fully loaded with bikes and without, for fast and easy vehicle access – because after all, those snacks aren’t going to pass themselves. Plus, the MTR’s nesting bike trays make for easy-on, easy-off loading. No more lifting bikes over the rack – simply flip the trays out of the way as needed to get you from parking lot to trailhead in record time. The Saris MTR also available in a 1-Bike version. Product Features - Modular: carries 2 bikes, up to 60 lbs, and can be customized with Add-On to transport up to four bikes. - Pivot away: unique wheel trays pivot and nest for easy loading and compact storage. - Dual-arm holders are compatible with a wide range of tire sizes, and never touch the bike's frame. - Full Tilt: tilting mechanism for easy hatch access. - Complete Integrated Security: locks the rack to the car and the bikes to the rack. - Designed to be used with 2" hitch receivers only. - Tray-style hitch bike rack - Carries 2 bikes, up to 60 lb. each - Customizable to carry more bikes with 1-Bike Add-On and 2-Bike Add-On - No assembly needed - Rack folds up for compact storage when not in use. - Tool-free installation - Rack weight: 55 lb - Adjustable wheel block to accommodate wheel sizes from 20 inches up to 29 inches and tire sizes as wide as 5 inches - Integrated locking cable secures bikes to the rack - Locking hitch pin secures rack to the car - Accommodates wheel bases up to 53 inches - 2" hitch compatible - Constructed from American-made aluminum and steel, and tested to outlive the elements
Transport all types of bikes with Saris’ Freedom 4-Bike hitch rack. Its innovative design adjusts to fit most bikes and sizes, including kids’ and even some recumbents, thanks to the adjustability of its center upright supports. It uses quick-adjust trays and ratcheting straps to secure four bikes of up to 35 pounds each, and loading is made easy by the low tray height. The center upright supports even tilt down to allow trunk access.
Built for the RV Life, Made for Anyone Whether you're an RV full timer, enthusiast or someone with a 2" receiver, the SuperClamp HD has your bike transport covered. This heavy-duty hitch rack features all the same specs as our top-selling SuperClamp EX, including dual wheel-clamping hooks, tilting capabilities and light-grabbing reflectors, all built on a dedicated 2" receiver base. Proven to stand up to miles on the road, this RV compatible hitch rack is as rugged as they come. Life with the RV just got a little better. - Carries 2 bikes, up to 60 lb/each. - This rack fits a wheelbase of up to 50". - Compatible with bike tires up to 4".
Hollywood's Sport Rider for Electric Bikes uses padded universal top clamps and adjustable wheel holders to safely carry 2 electric or standard bikes. Simply drop the bike into the wheel holders, then slide the self-locking clamp down onto the frame to secure the bike. The rack folds up when not in use, tilts down for easy cargo access, and includes a keyed-alike locking hitch pin and security cable. - Hitch Size: 2 inches - Max tire width: 3 inches - Max bike wheel base: 60 inches - Max weight capacity: 80 lbs per bike - Weight: 68 lbs - Not to be used on any trailer, fifth wheel or towed vehicle
$290.00 - $299.99
For around-town jaunts and cross-country excursions, Hollywood's Road Runner 4 is a great solution for carrying four bikes. Hollywood's rubber separators with integrated straps and a lower tie-down bar hold the bikes fast and ensure they won't bump each other. And, even when loaded, this rack easily tilts out of the way for rear access, and it folds down when not in use. Plus, Hollywood's No-Wobble system eliminates slack between the hitch and rack for extra stability. The Road Runner 4 also includes a keyed-alike locking hitch pin and 8-foot locking cable for total security and convenience. - Weight: 32 lbs - Max weight capacity: 35 lbs per bike - Not to be used on any trailer, fifth wheel, or towed vehicle
This is perfect for the commuter or rider who only needs to carry one bike. It is light at 25lbs, compact, easy to store & easy to use. RockyMounts includes both 1.25" and 2" components in the box, so it will work with either hitch receiver sizes, as well as their anti-wobble locking hitch bolt to keep the rack both tight and secure. The rack includes locks for locking the rack to the car and the bike to the rack with the convenience of one key. It folds flat against the car with a quick release handle and the bike easily loads with our platform wheel trays and ratcheting arms. If you do need to carry a second bike down the road, RockyMounts' MonoRail Add-on can be installed by removing the end cap and attaching with two bolts. It is simple to go back and forth between 1 & 2 bike configurations. Carries kids bike with 20" wheels up to adult 29" wheels up to 48" wheelbase. Carries Fat Bikes up to 5" tires providing enough clearance for RockShox Blutos & the new 197mm rear axles.
$251.99 - $279.99
For around-town jaunts and cross-country excursions, Hollywood's Road Runner 3 is a great solution for carrying three bikes. Hollywood's rubber separators with integrated straps and a lower tie-down bar hold the bikes fast and ensure they won't bump each other. And, even when loaded, this rack easily tilts out of the way for rear access, and it folds down when not in use. Plus, Hollywood's No-Wobble system eliminates slack between the hitch and rack for extra stability. The Road Runner 3 also includes a keyed-alike locking hitch pin and 8-foot locking cable for total security and convenience. • Weight: 31 lbs • Max weight capacity: 35 lbs per bike • Not to be used on any trailer, fifth wheel, or towed vehicle
Yakima's HitchSki is an attachment for your hitch-mounted rack (sold separately) that enables you to carry skis and snowboards. Simply swap the HitchSki for your bike attachment and you now have a rack that can be used year-round. It hauls up to six pairs of skis or four snowboards without the risk of damage thanks to rubber-padded arms. And, Yakima's SKS locks are included to prevent theft.
The LongArm truck bed extender easily extends the length of any truck bed up to 4 feet. Light and strong, the aluminum hitch mounted rack is the ideal solution for hauling fishing kayaks, boards, lumber, ladders and more. Adjustable to three distinct load-carrying positions and rated to carry up to 300 pounds in lower positions, the LongArm takes your truck bed to the next level. Product Details - Provides 4 feet of additional truck bed length with a 60” wide crossbar - Adjustable to three load-carrying positions: - Bed height for use when your truck tailgate is open (300 lb carrying capacity) - Bed rail height for use with our BedRock rack system or a tonneau cover (300 lb carrying capacity) - Truck cab height by combining theLong Arm Extension with a roof rack system (165 lb carrying capacity ) (sold separately) - Installs easily and securely to any 2” hitch receiver using the included 5/8” threaded hitch bolt Aluminum construction engineered for strength – weighs only 12 lbs! - Integrated tie-down points ensure a secure ride for your fishing kayak, canoe, ladders, lumber and more - Add any Yakima boat mount to the crossbar for added boat protection. - Yakima signature bottle opener lets you enjoy a post-paddle cold one - Durable black powder-coat finish - Add the LongArm Pad for increased load protection (sold separately) - Add the LongArm Height Extension up to cab height (sold separately). - Heights from the top of the tongue to the top of the crossbar at the four angle positions (Vertical to Horizontal): -- Low Bar Heights - 40 in, 37 in, 27 1/2 in, 14 1/4 in -- Mid Bar Heights- 41 3/8 in, 38 1/4 in, 28 in, 15 1/4 in -- High Bar Heights- 42 3/4 in, 39 1/2 in, 29 in, 15 3/4 in Technical Specs - Weight: 12.50 lbs - Dimensions: L 18.00in x W 50.50in x H 43.00in
Hollywood's Traveler racks get you traveling with all your bikes quickly and economically. The Traveler 4 carries 4 bikes and includes Hollywood's separators and anti-sway stabilizers, which makes mounting the bikes easy and protects them in transit. This versatile hitch-mount rack tilts down for easy rear access and the arms fold out of the way when the rack is not in use. Plus, Hollywood's No-Wobble Hitch holds the whole system steady even on bumpy roads. And with the universal heavy-duty metal hitch insert, the Traveler 4 fits 1 1/4- and 2-inch hitches so you can use your rack on different vehicles. - Not to be used on any trailer, fifth wheel, or towed vehicle - Weight: 28 lbs - Max weight capacity: 35 lbs per bike
The Rack Valet is the first mobile bike rack storage and transportation system. Easily attach your bike rack into either the 1-1/4" or 2" slot on the rack valet and then roll it out to your vehicle. Some bike Racks can weight up to 90 pounds, so save yourself the trouble (and back pain) and roll your rack right out to your car.
Page 1 of 1